Overview
The KCS series thyristor switching switches are power electronics products used to connect power capacitor loads to the grid. Designed for applications requiring switchgear and control devices, they enable rapid switching of pure capacitive or reactance (up to 14%) step-compensation systems. They not only provide symmetrical three-phase current compensation but also single-phase step-compensation of the grid.
Technical Data
Control circuit: Control input: DC8-16V
Load circuit: — Supply voltage: Un400V 50Hz/60Hz
— Load capacity: three-phase maximum 60kVar; single-phase 15kVar.
— Power consumption is approximately 2W per ampere
Applicable range: — Rated voltage Un±10%
— Harmonic voltage THD max. 5%
1st response speed <20mS Continuous response speed <40mS
Electrical safety: — Protection level I
— Distance EN61010:2001 Pollution Level II CAT III
— Protection grade IP10
Environmental conditions: — Operating temperature -20℃-+55℃
— Humidity: non-condensing 5%---95%
— Storage temperature -25°C to +70°C
Installation: — Installation position vertical or horizontal
— Heat dissipation distance is at least 50mm from the ventilation opening and at least 150mm from the heat dissipation device
Dimensions: 116mm*187mm*170mm (width*height*depth)
Weight: Approximately 2500g